Are you looking for professional packers and movers? Moving your home with packers and movers can be a stressful experience. And if you don’t know how to safely pack and move electronics, things can quickly spiral out of control. When dealing with electronics, your packers and movers must use extreme caution. After all, those devices are not only expensive, but they’re also delicate and can be easily damaged. However, if you plan ahead of time and follow some simple rules, your relocation with packers and movers should go off without a hitch.
Here are some tips on how to safely move electronics with packers and movers.
Only use professional packaging material
Proper wrapping is essential because electronics can be fragile and thin. For example, if the inside of the box isn’t full, your TV could very well bend in transport. If not packed properly your computers, monitors, refrigerators, etc. are very likely to be damaged. Bubble wrap, soft clothes or blankets can be used as paddings. But if you have the original packing boxes for your electronics, it works the best. The wrapping materials your packers and movers use should be thick enough to protect your electronics while being light enough not to add too much extra weight.
Packing electronics with packers and movers
First of all, thoroughly clean each electronic device. This will help protect them from dust and other particles that could damage them during the move. Once your devices are clean, begin wrapping them in packing paper or bubble wrap. For extra protection, you can also put each device in its own plastic bag before wrapping it. Once your devices are wrapped, start placing them in boxes. Fill any empty spaces with packing peanuts or foam blocks to prevent the devices from shifting during transit. Make sure the interior of the box is entirely filled with padding. Make sure your packers and movers store each device snugly so that it doesn’t move around inside the box during transport.
To avoid these minute details while packing – hire Porter Packers and Movers who are not only professional in their attitude but also take utmost care of all your goods.
Protection from bad weather
It is possible that your packers and movers will have to deal with bad weather. Even if it’s not raining, the weather should be taken into consideration when deciding how items will be stored or transported. This can be especially important if you are moving to a location in a different climate zone. Your packers and movers should be prepared if there’s extreme hot or cold.
- Most electronics are not heat-resistant and will be damaged by extreme heat.
- Extreme cold might cause damage from condensation on delicate parts.
- Packers and movers use storage containers with a layer of insulation to keep the electronics safe.
- If moisture is a problem, using silica gel to absorb condensation will reduce the moisture level in the carton.
- Similarly, covering slits with tape paper is a strong defence against dust.
Unplug and turn off the devices
While moving with packers and movers, make sure devices are unplugged and turned off and, if feasible, dismantled. Dismantling your devices before storing them makes them physically safer since they won’t bend, move, or separate. Follow the product manual when it comes to dismantling them for moving. Batteries that are left in gadgets might leak acid and damage the devices, so remember to remove these. Once all your devices are packed up, close the boxes and seal them with tape. Then label each box with the contents and “Fragile” so that packers and movers will know to handle them with care.
Back up your critical data
While moving with packers and movers, your chances of losing data on any device are quite low. However, if such an unforeseeable event occurs, you should be prepared. Not all roads are safe, and accidents do occur. All it takes is a single drop to render your device worthless. Take a backup of important data from your gadgets. You can take a backup of your data on the cloud or download it to an external hard drive.
Secure cords in separate zip-locked bags
It’s a good idea to keep the cords for your electronics separate from the rest of your belongings. Electronic cords are often quite thin and could be easily damaged during transport. Instead of keeping them loose in boxes, you can keep them in their own bag. Make a list of things like batteries, computer parts, cords and cables, and more. There are many smaller, low-value parts that you don’t want to lose or break during transport. Anything that is small enough to fit in your backpack or duffel bag, should be kept there, not with the packers and movers.
Pre-Move check for Packers and Movers
Now that all of your electronics are safely wrapped, it’s time to check them over and ensure that they’re ready to move. Make a checklist of all of the things that you need to take care of before you can start moving your electronics.
Conclusion
Packing up all your belongings, renting a truck, and hauling everything to your new home is exhausting, both physically and mentally. And, if you have a lot of electronics, the task can be even more daunting. Packing up electronics for a move is time-consuming and stressful. But if you follow these simple steps, you can rest assured that your devices will arrive at your new home safe and sound.
Fortunately, there are professional packers and movers. Porter’s Packers and Movers can make your life much easier. From safely packing your goods to carefully transporting them — our professionals will handle all of the tedious tasks. Put your trust in Porter’s professional packers and movers and relax!